English  
Embedded & Robotics Solution for Hobbyist, Students, Learners and Developers...

Track Orders


Waveshare 3.2" TFT Touch Screen LCD for Raspberry Pi



Rs.1,499.00

GST 18% extra
Model: SYN-1116
Add to Cart:


  • Description
  • Download & Details
  • Reviews
Model No SYN-1116
Availability In Stock
Warranty None

 

The 3.2 inch TFT LCD module is a special design for Raspberry Pi for portable application. It features a 3.2” display with 320x240 16bit color pixels and resistive touch screen. The LCD is well mated with Pi board and interface with Pi via the high speed SPI port, and support console, X windows, displaying images or video etc. It also provides 4 press buttons for user defined functions.


Specification:

  • 3.2” inch TFT LCD screen
  • Resolution 320 x 240, RGB565 format
  • SPI LCD data bus
  • LCD controller ILI9341
  • Touch panel controller STMPE6
  • Expanded available I/O pins

Features:

  • 3.2” inch TFT LCD screen
  • Designed for Raspberry Pi, easy to use
  • Resistive touch panel
  • 4 user defined press buttons
  • Well mate with Raspberry Pi Model B+ Board
  • FBTFT graphic library support
  • Both command console and X window support
  • Mounted directly, no need of any extended shield
  • Supports any revision of Raspberry Pi (directly-pluggable)
  • High quality immersion gold surface plating
  • Driver provided (works with custom Raspbian directly)

Key Parameters:

LCD Type

TFT

LCD Interface

SPI

Touch Screen Type

Resistive

Touch Screen Controller

XPT2046

Colors

65536

Backlight

LED

Resolution

320*240 (Pixel)

Aspect Ratio

4:3

Power Consumption

TBD

Backlight Current

TBD

Operating Temp. (℃)

TBD


Interface:

PIN NO.

SYMBOL

DESCRIPTION

1, 17

3.3V

Power positive (3.3V power input)

2, 4

5V

Power positive (5V power input)

3, 5, 7, 8, 10, 22

NC

NC

6, 9, 14, 20, 25

GND

Ground

11

TP_IRQ

Touch Panel interrupt, low level while the Touch Panel detects touching

12

KEY1

Key

13

RST

Reset

15

LCD_RS

LCD instruction control, Instruction/Data Register selection

16

KEY2

Key

18

KEY3

Key

19

LCD_SI / TP_SI

SPI data input of LCD/Touch Panel

21

TP_SO

SPI data output of Touch Panel

23

LCD_SCK / TP_SCK

SPI clock of LCD/Touch Panel

24

LCD_CS

LCD chip selection, low active

26

TP_CS

Touch Panel chip selection, low active


Downloads:

Development resources:Image, schematic, dimension, software, etc.
Download:www.waveshare.com/wiki/3.2inch_RPi_LCD_(B)


FAQ:

Why the LCD doesn't work with my Raspbian?

To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our provided image directly.

Why the LCD still doesn't work with the Waveshare provided image?

Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. 

Which power supply should I use?

It is strongly recommended to use a stand-alone 5V/2A power adapter, because the PC's USB port might have not enough power to support the Pi and LCD.

 

  • Model: SYN-1116

Be the first to write a review.  Write a Review.

This product was added to our catalog on Tuesday 03 November, 2015.



Content

Arduino at Lowest Price

Experience Arduino Never Before...



SHOP NOW !